Dee Kay Designs

Floriani Press N Bond®

Floriani Press N Bond®


Use this "no sew" bonding material to adhere patches, appliqués and embroideries to most fabrics without stitching!

Press N Bond withstands laundering and dry cleaning and will create a permanent bond between fabric surfaces when heat is applied. NO sewing is required! Adheres to Vinyl, Polyester, Cotton, Polycotton and most other fabrics.

0x0x0 in

To Use Press N Bond®:



 1. Complete the embroidery design or patch
and remove any excess stabilizer


2. Trace or print the reverse image onto the paper side of Press N Bond.


3. Cut the shape to size.


4. Fuse Press N Bond to the back of the
fabric or embroidery. Use an iron
temperature of at least 260° (125°C)
and hold pressure for at least 4 seconds. 


 5. Once cooled, peel back the release paper
which will expose the fusible surface.


 Position the patch/emblem or appliqué
on the base material and press from the
fabric side. Use the same temperature
settings used in step 3 and hold the iron
in place for 4 seconds in order to melt
the adhesive.


No Sew Applique has never been easier!

*Note: All irons vary in temperature. The temperature given is a base estimate. If you find that you are not getting a good bond, increase your irons temperature until the adhesive melts.

**All adhesives will bond more securely to fabrics that do not have sizing or starch applied to the surface. If possible remove these finishes before using Press N Bond.

***Press N Bond is not recommended for items/fabrics containing Teflon.